HF-12600 (High Flow, Plastic Bracket) Water Purifier

The standard 10" pre-filter cartridges are economical and easy to replace; a 10 bar gauge shows the operating pressure. Supplied with a shut-off valve or a solenoid valve.

Features

Direct flow: tankless, always fresh water
High 600 GPD capacity
Standard 10" filter housings
Pressure monitoring with 10 bar gauge
Plastic frame

Applications

Busy offices and workplaces
Cafés, restaurants and commercial kitchens
Schools, dormitories and clinics
Large households and multi-point use

Mains waterEnters the unit from the cold water line through the feed valve.Inlet
01
10" Sediment 5 µmRetains sand, rust and sedimentReplace: 6 - 12 months
02
10" GAC CarbonReduces chlorine, taste and odourReplace: 6 - 12 months
03
10" CTO CarbonReduces residual chlorine and organicsReplace: 6 - 12 months
04
1 × 600 GPD MembraneSeparates dissolved salts and contaminantsReplace: 12 - 24 months
05
2.5" Inline Post Carbon (Quick-connect)Polishes taste and odour as the final stageReplace: 6 - 24 months
Purified waterPurified water is delivered to the faucet, ready to use.Outlet

Stage	Filter	Function	Replace
Stage 1	10" Sediment 5 µm	Retains sand, rust and sediment	6 - 12 months
Stage 2	10" GAC Carbon	Reduces chlorine, taste and odour	6 - 12 months
Stage 3	10" CTO Carbon	Reduces residual chlorine and organics	6 - 12 months
Stage 4	1 × 600 GPD Membrane	Separates dissolved salts and contaminants	12 - 24 months
Stage 5	2.5" Inline Post Carbon (Quick-connect)	Polishes taste and odour as the final stage	6 - 24 months

Replacement intervals are typical values and depend on water quality and usage.

Operating Conditions

Feed water pressure: 1 - 4 bar (with pump)
Feed water temperature: 5 - 38 °C (41 - 100 °F)
Feed water TDS: Max. 500 ppm
Feed water pH: 3 - 11
Power supply: 220 - 240 V AC, 50 Hz
Pump supply: 24 V DC (via adapter)

Materials and Construction

Stock code: 3-07-HF12600
Frame: Plastic
Filter housing: Standard 10" housing
Pump: 600 GPD
Membrane: 1 × 600 GPD
Faucet: Luxury faucet
Valve: Shut-off or solenoid valve
Pressure gauge: 10 bar
Warranty / service life: 2 years / at least 10 years

Shut the cold water valve; fit the connection kit (feed adapter) to the cold water line.
Drill the worktop first with a 5 mm, then a 12 mm bit and mount the faucet.
Connect the inlet, faucet and drain tubing; plug in the adapter.
Open the valve and on first start-up flush the system by running the faucet for a few minutes.

Do not connect the unit to hot water (above 40 °C). Replace the filters at least once a year; if the unit is not used for more than a month, close the inlet valve and unplug the adapter.

Version	Box Size (mm)	Box Weight
HF 12600	275 × 430 × 485	12.50 kg

Vehicle and container loadingPallet Size: 100 × 120 cm (ISO)
Vehicle	Pallets	Boxes / Pallet	Palletised	Loose
20' Container	10	32	320 pcs	420 pcs
40' DC Container	20	32	640 pcs	864 pcs
40' HC Container	20	40	800 pcs	1,080 pcs
Curtain-side Truck	26	40	1,040 pcs	1,240 pcs

Standard replacement filters for this unit. Other filters that fit, including optional extra stages, are listed under Optional filters.

Stock Code	Filter	Size	Connection	Filter type
6-02-10-05-EK110 +5	End-Capped Spun PP Filter Cartridge	10" - 20"	-	Spun PP
6-03-GAC10 +3	GAC Carbon Filter Cartridge	10" - 20"	-	GAC Carbon
6-03-CTO10 +1	Standard CTO Carbon Block Filter	10" - 20"	-	CTO Carbon
3-1-1-ST300 +3	Star 3012 RO Membrane	3012	-	RO Membrane
6-25-POST-R	Regnum Inline Post Carbon Filter	2.5"	Quick-connect	Post Carbon