End-Capped Spun PP Filter Cartridge
PP end caps top and bottom · Melt-blown polypropylene · 110 / 135 / 170 g · 10" - 40"
Sediment filter cartridge made of a melt-blown polypropylene fibre body fitted with polypropylene end caps at both ends. It physically retains sediment, silt, sand and rust, and serves as a pre-filter in water treatment systems, protecting downstream filters and equipment.
- Nominal rating
- 5 µm (standard)
- Operating temperature
- 4 - 45 °C
- Cartridge length
- 10" - 40"
- Replacement interval
- 3 - 6 months
Stock codes6-02-10-05-EK1106-02-10-05-EK1356-02-10-05-EK1706-02-20-05-EK2206-02-30-05-EK3306-02-40-05-EK440
Overview
The end caps seat the cartridge correctly in the housing, prevent it from shifting and improve sealing.
Features
- Top and bottom caps for secure, correct seating in the housing
- End design that prevents shifting and improves sealing
- 110 / 135 / 170 g options for different dirt-holding capacities
- 100% polypropylene; chemically resistant, does not corrode
- Depth filtration through a graded-density fibre structure
- Economical, easy-to-replace consumable
Applications
- Pre-filter in reverse osmosis (RO) and water treatment units
- Pre-filtration of mains water in residential and commercial buildings
- Protection ahead of carbon filters and membranes
- Well, tank and spring water filtration
- Industrial process and cooling water lines
Models and Stock Codes
| Stock Code | Model | Nominal Length | Weight (g) | Recommended Flow* (l/h) | A (mm) | B (mm) | C (mm) |
|---|---|---|---|---|---|---|---|
| 6-02-10-05-EK110 | 10" End-Capped Spun | 10" | 110 | 2000 | 250 | 61 | 28 |
| 6-02-10-05-EK135 | 10" End-Capped Spun | 10" | 135 | 2000 | 250 | 61 | 28 |
| 6-02-10-05-EK170 | 10" End-Capped Spun | 10" | 170 | 2000 | 250 | 61 | 28 |
| 6-02-20-05-EK220 | 20" End-Capped Spun | 20" | 220 | 3000 | 508 | 61 | 28 |
| 6-02-30-05-EK330 | 30" End-Capped Spun | 30" | 330 | 4000 | 762 | 61 | 28 |
| 6-02-40-05-EK440 | 40" End-Capped Spun | 40" | 440 | 5000 | 1016 | 61 | 28 |
Connection: PP end caps with open centre at both ends. Standard rating: 5 µm.
* Typical value for 20 °C water; flow decreases with finer ratings and dirty water.
Technical Specifications
Operating Conditions
- Operating temperature
- 4 - 45 °C (39 - 113 °F)
- Operating pressure
- As per housing rating
- Application
- Sediment filtration
- Recommended change-out Δp
- 1 bar (15 psi)
- Replacement interval
- 3 - 6 months (typical)
Materials and Construction
- Filter media
- Melt-blown polypropylene (PP) fibre
- Construction
- Coreless, graded density
- End caps
- Polypropylene (PP)
- End configuration
- Open-centre caps at both ends
- Use
- Disposable, not washable
Installation and Replacement
- Shut off the water supply and relieve the pressure in the housing.
- Open the housing, remove the used cartridge and clean the inside of the housing.
- Insert the new cartridge so that its end caps sit in the centring seats of the housing.
- Check the O-ring, close the housing, slowly reopen the water supply and check for leaks.
- On first use, flush the line for a few minutes.
End-capped spun cartridges are disposable and must not be washed and reused. Replace the cartridge when the inlet-outlet pressure difference reaches 1 bar, or every 6 months at the latest.
Packaging
| Stock Code | Box Size (mm) | Pcs / Box | Box Weight |
|---|---|---|---|
| 6-02-10-05-EK110 | 390 × 390 × 270 | 25 | 4.35 kg |
| 6-02-10-05-EK135 | 390 × 390 × 270 | 25 | 4.69 kg |
| 6-02-10-05-EK170 | 390 × 390 × 270 | 25 | 5.84 kg |
| 6-02-20-05-EK220 | - | - | |
| 6-02-30-05-EK330 | - | - | |
| 6-02-40-05-EK440 | - | - |
Packaging details for 20" - 40" models are available from our sales team.
Wholesale and OEM
Request a quote and lead time for this product
We quote distributors, installers and project contractors by stock code. Ask us about OEM and private label production as well.
