Spun PP Sediment Filter Cartridge
Melt-blown polypropylene fibre · Depth filtration · 5" / 10" / 20" / 30" / 40"
Sediment filter cartridge made by melt-blowing polypropylene fibres into a single coreless body. It physically retains sediment, silt, sand and rust, and serves as a pre-filter in water treatment systems, protecting downstream filters and equipment.
- Nominal rating
- 5 µm (standard)
- Operating temperature
- 4 - 45 °C
- Cartridge length
- 5" - 40"
- Replacement interval
- 3 - 6 months
Stock codes6-02-05-056-02-10-056-02-20-056-02-30-056-02-40-05
Overview
The fibre structure becomes denser from the outside in, providing depth filtration: coarse particles are held in the outer layers and finer particles in the inner layers. Polypropylene is chemically resistant, does not corrode and imparts no taste or odour to the water.
Features
- Depth filtration through a graded-density fibre structure
- High dirt-holding capacity, long service life
- 100% polypropylene; chemically resistant, does not corrode
- Imparts no taste, odour or colour to the water
- Fits standard 5" - 40" filter housings
- Economical, easy-to-replace consumable
Applications
- Pre-filtration of mains water in residential and commercial buildings
- Pre-filter in reverse osmosis (RO) and water treatment units
- Protection ahead of carbon filters and membranes
- Well, tank and spring water filtration
- Industrial process and cooling water lines
Models and Stock Codes
| Stock Code | Model | Nominal Length | Recommended Flow* (l/h) | A (mm) | B (mm) | C (mm) |
|---|---|---|---|---|---|---|
| 6-02-05-05 | 5" Spun Filter | 5" | 1000 | 125 | 61 | 28 |
| 6-02-10-05 | 10" Spun Filter | 10" | 2000 | 250 | 61 | 28 |
| 6-02-20-05 | 20" Spun Filter | 20" | 3000 | 508 | 61 | 28 |
| 6-02-30-05 | 30" Spun Filter | 30" | 4000 | 762 | 61 | 28 |
| 6-02-40-05 | 40" Spun Filter | 40" | 5000 | 1016 | 61 | 28 |
Connection: double open end (DOE), no gasket.
* Typical value for 20 °C water; flow decreases with finer ratings and dirty water.
Technical Specifications
Operating Conditions
- Operating temperature
- 4 - 45 °C (39 - 113 °F)
- Operating pressure
- As per housing rating
- Application
- Sediment filtration
- Recommended change-out Δp
- 1 bar (15 psi)
- Replacement interval
- 3 - 6 months (typical)
Materials and Construction
- Filter media
- Melt-blown polypropylene (PP) fibre
- Construction
- Coreless, graded density
- End configuration
- Double open end (DOE), no gasket
- Use
- Disposable, not washable
Installation and Replacement
- Shut off the water supply and relieve the pressure in the housing.
- Open the housing, remove the used cartridge and clean the inside of the housing.
- Centre the new cartridge in the housing, check the O-ring and close the housing.
- Slowly reopen the water supply and check for leaks.
- On first use, flush the line for a few minutes.
Spun cartridges are disposable and must not be washed and reused. Replace the cartridge when the inlet-outlet pressure difference reaches 1 bar, or every 6 months at the latest.
Packaging
| Stock Code | Box Size (mm) | Pcs / Box | Box Weight |
|---|---|---|---|
| 6-02-05-05 | 325 × 325 × 525 | 100 | 6.47 kg |
| 6-02-10-05 | 325 × 325 × 525 | 50 | 6.47 kg |
| 6-02-20-05 | 325 × 325 × 525 | 25 | 6.65 kg |
| 6-02-30-05 | 325 × 325 × 780 | 25 | 9.58 kg |
| 6-02-40-05 | 325 × 325 × 1030 | 25 | 12.72 kg |
Wholesale and OEM
Request a quote and lead time for this product
We quote distributors, installers and project contractors by stock code. Ask us about OEM and private label production as well.
