HF-03-K CTO Coconut Filter
2.5" HF type · Coconut shell carbon block · 10 µm · Quick HF connection, 4/6 stems
Sealed CTO coconut carbon block filter used in HF series reverse osmosis units and water purifiers. The compressed activated carbon, made from coconut shell, reduces residual chlorine and chlorine compounds, unpleasant taste and odour, and organic substances. CTO stands for Chlorine, Taste and Odor.
- Nominal rating
- 10 µm
- Flow rate
- 2.85 L/min
- Service capacity
- 9,462 L or 1 year
- Temperature / pressure
- 5 - 42 °C / 2 - 7 bar
Stock code6-25-HF03-K
Overview
Besides reducing chlorine, the 10 µm carbon block retains fine particles and protects the reverse osmosis membrane.
Features
- 10 µm carbon block reduces chlorine, taste, odour and fine particles
- Coconut shell-based activated carbon
- Protects the reverse osmosis membrane from chlorine
- Inlet/outlet on one end; fits HF series units directly
- Sealed housing; no housing cleaning needed at replacement
- Change-month marking area on the label (1 - 12)
Applications
- HF series reverse osmosis (RO) units
- HF 3-piece and 5-piece filter sets
- Under-sink water purifiers
- Mains-fed (bottleless) water dispensers
- Office and small commercial treatment systems
Models and Stock Codes
| Stock Code | Model | Filter Media | Rating (µm) | Flow (L/min) | Capacity* (L) | A (mm) | B (mm) |
|---|---|---|---|---|---|---|---|
| 6-25-HF03-K | HF-03-K CTO Filter | Carbon block, coconut shell-based | 10 | 2.85 | 9462 | 290 | 66 |
A: Overall length (including connection stems) · B: Outer diameter. 2.5" HF-type cartridge; inlet and outlet (IN / OUT) are on the same end. Sealed (welded) housing; the filter cannot be opened and is replaced as a unit.
* Label value; 9,462 L or 1 year, whichever comes first. Actual capacity depends on water quality.
Technical Specifications
Operating Conditions
- Operating pressure
- 2 - 7 bar (29 - 102 psi)
- Operating temperature
- 5 - 42 °C (41 - 108 °F)
- Flow rate
- 2.85 L/min (171 l/h)
- Replacement interval
- 9,462 L or 1 year
Materials and Construction
- Filter media
- Compressed activated carbon block
- Carbon source
- Coconut shell
- Housing
- Plastic (typically PP), welded
- Connection
- Inlet/outlet on one end, 4/6 stems (Quick HF)
- Use
- Disposable, sealed
Installation and Replacement
- Shut off the unit's water supply and open the faucet to relieve pressure.
- Remove the used filter from the HF connection head; use the 3-95-HFSA removal tool if needed.
- Remove the protective caps from the new filter and push it fully home, observing the IN / OUT direction.
- Slowly reopen the water supply and check the connections for leaks.
- On first use, flush for at least 5 minutes until the water runs clear to remove carbon fines; mark the change month on the label.
The filter is disposable and cannot be opened or washed. Replace it after 9,462 litres or 1 year, whichever comes first; replace earlier if chlorine taste or odour returns. Do not use with microbiologically unsafe water or water of unknown quality without disinfection.
Packaging
| Stock Code | Box Size (mm) | Pcs / Box | Box Weight | Boxes / Pallet | Pallet Size |
|---|---|---|---|---|---|
| 6-25-HF03-K | 325 × 325 × 330 | 25 | 10.43 kg | 40 | 100 × 120 cm (ISO) |
Wholesale and OEM
Request a quote and lead time for this product
We quote distributors, installers and project contractors by stock code. Ask us about OEM and private label production as well.



