HF-01 Sediment Filter

By retaining particles at the start of the system, it prevents clogging of the carbon filters and the reverse osmosis membrane and extends their service life. With inlet and outlet on the same end, it fits the HF connection head without tools.

Features

5 µm depth filtration with polypropylene
Retains sand, rust and sediment at the start of the system
Protects the carbon filters and membrane from clogging
Inlet/outlet on one end; fits HF series units directly
Sealed housing; no housing cleaning needed at replacement
Change-month marking area on the label (1 - 12)

Applications

HF series reverse osmosis (RO) units
HF 3-piece and 5-piece filter sets
Under-sink water purifiers
Mains-fed (bottleless) water dispensers
Office and small commercial treatment systems

Stock Code	Model	Filter Media	Rating (µm)	Flow (L/min)	Capacity* (L)	A (mm)	B (mm)
6-25-HF01-5	HF-01 Sediment Filter	Polypropylene (PP)	5	2.85	9462	290	66

Dimensions

A: Overall length (including connection stems) · B: Outer diameter. 2.5" HF-type cartridge; inlet and outlet (IN / OUT) are on the same end. Sealed (welded) housing; the filter cannot be opened and is replaced as a unit.
* Label value; 9,462 L or 1 year, whichever comes first. Actual capacity depends on water quality.

Operating Conditions

Operating pressure: 2 - 7 bar (29 - 102 psi)
Operating temperature: 5 - 42 °C (41 - 108 °F)
Flow rate: 2.85 L/min (171 l/h)
Replacement interval: 9,462 L or 1 year

Materials and Construction

Filter media: Polypropylene (PP)
Filtration type: Depth filtration, nominal
Housing: Plastic (typically PP), welded
Connection: Inlet/outlet on one end, 4/6 stems (Quick HF)
Use: Disposable, sealed

Shut off the unit's water supply and open the faucet to relieve pressure.
Remove the used filter from the HF connection head; use the 3-95-HFSA removal tool if needed.
Remove the protective caps from the new filter and push it fully home, observing the IN / OUT direction.
Slowly reopen the water supply and check the connections for leaks.
On first use, flush the line for a few minutes; mark the change month on the label.

The filter is disposable and cannot be opened or washed. Replace it after 9,462 litres or 1 year, whichever comes first; more frequent replacement may be needed with high-sediment water. Do not use with microbiologically unsafe water or water of unknown quality without disinfection.