Pure Water Top-Loading Bottled Water Dispenser

Stainless steel tanks, compressor cooling and an automatic thermostat keep the water at the ideal temperature; the hot water faucet has a child lock.

Features

Dry-run protection
Automatic temperature control (thermostat)
Hygienic stainless steel tanks
Quiet operation; suitable for homes and offices
Powerful heating and cooling, low energy consumption

Applications

Offices and workspaces
Homes
Areas without a mains water connection
Waiting rooms

Mains waterEnters the unit from the cold water line through the feed valve.Inlet
01
2.5 L stainless steel8 - 12 °CCapacity: 2 L/h
02
1 L stainless steel85 - 95 °CCapacity: 5 L/h
Purified waterPurified water is delivered to the faucet, ready to use.Outlet

Reservoir	Tank	Temperature	Capacity
Cold water	2.5 L stainless steel	8 - 12 °C	2 L/h
Hot water	1 L stainless steel	85 - 95 °C	5 L/h

The hot water faucet has a child lock. The unit does not purify water; it is used with bottled water.

Operating Conditions

Water source: Top-loading bottle (no purification)
Power supply: 220 - 240 V AC, 50 Hz
Cooling: Compressor, R134A refrigerant
Cooling tubing: Copper

Materials and Construction

Stock code: 3-08-PWD
Unit size: 280 × 290 × 840 mm
Faucets: Hot (child lock), cold
Protection: Overcurrent and dry-run protection
Colour: White

Place the dispenser on a level floor at least 10 cm from the wall; after transport, leave it upright for 2 hours before switching on.
Remove the bottle cap and clean the neck; turn the bottle upside down and seat it in the top holder.
Open first the cold, then the hot faucet until water flows; do not switch on the heater before the hot water tank is full.
Plug in the unit and switch on the hot and cold switches; discard the first few glasses of water on first use.

The hot water faucet has a child lock; take care when children use the dispenser. Clean the dispenser every 3 - 6 months; if it will not be used for a long period, unplug it and empty the tanks.