Hf BB-1200 (High Flow) Water Purifier

The large-diameter BigBlue pre-filters give a long service life at high flow; the unit operates automatically with a solenoid valve and a 10 bar gauge shows the operating pressure.

Features

Direct flow: tankless, always fresh water
Very high 1,200 GPD capacity
20" BigBlue pre-filters
Automatic operation with solenoid valve
Pressure monitoring with 10 bar gauge

Applications

Busy offices and workplaces
Cafés, restaurants and commercial kitchens
Schools, dormitories and clinics
Large households and multi-point use

Mains waterEnters the unit from the cold water line through the feed valve.Inlet
01
20" BigBlue Sediment 5 µmRetains sand, rust and sedimentReplace: 6 - 12 months
02
20" BigBlue CTO CarbonReduces residual chlorine and organicsReplace: 6 - 12 months
03
2 × 600 GPD MembraneSeparates dissolved salts and contaminantsReplace: 12 - 24 months
04
2.5" Inline Post Carbon (Quick-connect)Polishes taste and odour as the final stageReplace: 6 - 24 months
Purified waterPurified water is delivered to the faucet, ready to use.Outlet

Stage	Filter	Function	Replace
Stage 1	20" BigBlue Sediment 5 µm	Retains sand, rust and sediment	6 - 12 months
Stage 2	20" BigBlue CTO Carbon	Reduces residual chlorine and organics	6 - 12 months
Stage 3	2 × 600 GPD Membrane	Separates dissolved salts and contaminants	12 - 24 months
Stage 4	2.5" Inline Post Carbon (Quick-connect)	Polishes taste and odour as the final stage	6 - 24 months

Replacement intervals are typical values and depend on water quality and usage.

Operating Conditions

Feed water pressure: 1 - 4 bar (with pump)
Feed water temperature: 5 - 38 °C (41 - 100 °F)
Feed water TDS: Max. 500 ppm
Feed water pH: 3 - 11
Power supply: 220 - 240 V AC, 50 Hz
Pump supply: 36 V DC (via adapter)

Materials and Construction

Stock code: 3-07-HF1200BB
Filter housing: 20" BigBlue housing
Pump: 1.200 GPD
Membrane: 2 × 600 GPD
Faucet: Luxury faucet
Valve: Solenoid valve
Pressure gauge: 10 bar
Warranty / service life: 2 years / at least 10 years

Shut the cold water valve; fit the connection kit (feed adapter) to the cold water line.
Drill the worktop first with a 5 mm, then a 12 mm bit and mount the faucet.
Connect the inlet, faucet and drain tubing; plug in the adapter.
Open the valve and on first start-up flush the system by running the faucet for a few minutes.

Do not connect the unit to hot water (above 40 °C). Replace the filters at least once a year; if the unit is not used for more than a month, close the inlet valve and unplug the adapter.

Version	Box Size (mm)	Box Weight
HF 1200	360 × 455 × 820	26.50 kg

Vehicle and container loadingPallet Size: 100 × 120 cm (ISO)
Vehicle	Pallets	Boxes / Pallet	Palletised	Loose
20' Container	10	12	120 pcs	246 pcs
40' DC Container	20	12	240 pcs	500 pcs
40' HC Container	20	18	360 pcs	567 pcs
Curtain-side Truck	26	18	468 pcs	671 pcs

Standard replacement filters for this unit. Other filters that fit, including optional extra stages, are listed under Optional filters.

Stock Code	Filter	Size	Connection	Filter type
6-02-10-BB05 +1	BigBlue Spun PP Filter Cartridge	Big Blue	-	Spun PP
3-1-1-ST300 +3	Star 3012 RO Membrane	3012	-	RO Membrane
6-25-POST-R	Regnum Inline Post Carbon Filter	2.5"	Quick-connect	Post Carbon