Regnum Jaco Inline Sediment Filter

By retaining particles at the start of the system, it prevents clogging of the carbon filters and the reverse osmosis membrane and extends their service life. Jaco-type fittings and elbows are screwed into the threaded ports at both ends to connect it to the unit.

Features

Depth filtration with melt-blown polypropylene
Retains sand, rust and sediment at the start of the system
Protects the carbon filters and membrane from clogging
Threaded (Jaco) connection for a secure, leak-tight fit
Sealed housing; no housing cleaning needed at replacement
Fits standard 2.5" Jaco inline filter positions

Applications

Residential reverse osmosis (RO) units
Under-sink and countertop water purifiers
Mains-fed (bottleless) water dispensers
Feed lines of refrigerators, ice and coffee machines
Office and small commercial treatment systems

Stock Code	Model	Rating (µm)	Max. Flow (L/min)	Capacity* (L)	A (mm)	B (mm)
6-25-PP-J	2.5" Jaco Sediment Filter	5	2.8	9462	290	65

Dimensions

A: Overall length (including threaded ports) · B: Outer diameter. Sealed (welded) housing; the filter cannot be opened and is replaced as a unit. Fittings and elbows are supplied separately.
* 2,500 gal. Actual capacity depends on the sediment load and flow rate.

Operating Conditions

Operating pressure: 1.4 - 8 bar (20 - 116 psi)
Operating temperature: 4 - 38 °C (39 - 100 °F)
Maximum flow rate: 2.8 L/min (168 l/h)
Replacement interval: 9,462 L or 6 months max.

Materials and Construction

Filter media: Melt-blown polypropylene (PP)
Filtration type: Depth filtration, nominal
Housing: Plastic (typically PP), welded
Connection: 1/4" female thread (Jaco), both ends
Use: Disposable, sealed

Shut off the unit's water supply and open the faucet to relieve pressure.
Disconnect the tubing and unscrew the fittings and elbows from the used filter.
Wrap the fitting threads with PTFE tape and screw them into the new filter, observing the flow direction (IN → OUT).
Reconnect the tubing, slowly reopen the water supply and check the connections for leaks.
On first use, flush the line for a few minutes.

The filter is disposable and cannot be opened or washed. Replace it after 9,462 litres or every 6 months at the latest; more frequent replacement may be needed with high-sediment water. Replacing it together with the other pre-filters in the system is recommended. Do not overtighten the fittings.