C Series Washable Plastic Filter

The polyester mesh is integrated into the structural frame during moulding; no glue or sealants are used. The cartridge can be reused after regular washing.

Features

Double O-ring collar for a centred, sealed fit in the housing
Compatible with GreenAqua GA Plus series filter housings
Washable and reusable; lowers operating costs
Consistent water flow, very low pressure drop
Mesh integrated into the frame during moulding; no glue
Easy cleaning, short maintenance time

Applications

Pre-filtration of mains water in residential and commercial buildings
Replacement cartridge for GA Plus and C series housings (Ø 57 mm socket)
Retention of sand, sediment and particles ahead of treatment systems
Pre-filtration of well and tank water
Protection of plumbing, fittings and appliances against particles

Stock Code	Model	Nominal Length	Recommended Flow (l/h)	A (mm)	B (mm)	C (mm)
6-04-YF5-C01	5" C Series Washable Filter	5"	1200	125	70	57
6-04-YF10-C01	10" C Series Washable Filter	10"	2500	250	70	57
6-04-YF20-C01	20" C Series Washable Filter	20"	4000	505	70	57

Dimensions

Connection: double O-ring Ø 57 mm collar at one end (C series).

Operating Conditions

Max. operating pressure: 8.6 bar (125 psi)
Min. operating pressure: 0.5 bar (7.25 psi)
Operating temperature: 4 - 45 °C (39 - 113 °F)
Average service life: Up to 24 months
Maintenance interval: Depending on water quality and usage

Materials and Construction

Filter media: Polyester mesh
Frame and end caps: Polypropylene (PP)
End configuration: Double O-ring collar (C series)
O-rings: EPDM
Construction: No glue, no sealants
Drinking water: Non-toxic materials
Use: Washable, reusable

Shut off the water supply and relieve the pressure in the housing.
Open the housing and pull the cartridge out by its collar.
Clean the cartridge under running water with a soft brush, from the outside in.
Check the O-rings, moisten them if needed, seat the cartridge in its socket and close the housing.
Slowly reopen the water supply and check for leaks.

Washing frequency depends on water quality, dirt load and usage; wash the cartridge when a noticeable drop in flow occurs. Do not use solvents, abrasives or harsh chemicals. Replace the cartridge if the O-rings are cut or flattened, the mesh is torn or the frame is deformed.