BX String Wound Filter with O-Rings
Polypropylene string wound · Double O-ring Ø 45 mm collar (B series) · 10" / 20"
Sediment filter cartridge made by winding polypropylene yarn in a defined pattern onto a polypropylene support core. The double O-ring Ø 45 mm collar at one end fits into the socket in the housing head and provides the seal, keeping the cartridge centred and fixed in the housing.
- Nominal rating
- 5 µm (standard)
- Connection collar
- Ø 45 mm · double O-ring
- Recommended flow rate
- 2,000 - 3,000 l/h
- Replacement interval
- 3 - 6 months
Stock codes6-01-10-B016-01-20-B01
Overview
The winding becomes denser from the outside in, providing depth filtration: rust, sand, sediment and silt are held throughout the cartridge. For use in B series housings (Ø 45 mm socket).
Features
- Double O-ring collar for a centred, sealed fit in the housing
- High dirt-holding capacity through depth filtration
- Graded winding for long service life
- Polypropylene yarn and core; chemically resistant
- Fits B series housings (Ø 45 mm socket)
- Economical, easy-to-replace consumable
Applications
- Pre-filtration of mains water in residential and commercial buildings
- Replacement sediment cartridge for B series housings
- Protection ahead of reverse osmosis (RO) and water treatment units
- Well, tank and spring water filtration
- Protection of plumbing, fittings and appliances against sediment
Models and Stock Codes
| Stock Code | Model | Nominal Length | Recommended Flow* (l/h) | A (mm) | B (mm) | C (mm) |
|---|---|---|---|---|---|---|
| 6-01-10-B01 | 10" BX String Wound Filter | 10" | 2000 | 250 | 61 | 45 |
| 6-01-20-B01 | 20" BX String Wound Filter | 20" | 3000 | 505 | 61 | 45 |
Connection: double O-ring Ø 45 mm collar at one end (B series).
* Typical value for a 5 µm cartridge and 20 °C water; flow decreases with dirty water.
Technical Specifications
Operating Conditions
- Operating temperature
- 4 - 45 °C (39 - 113 °F)
- Application
- Sediment filtration
- Recommended change-out Δp
- 1 bar (15 psi)
- Replacement interval
- 3 - 6 months (per water quality)
Materials and Construction
- Filter media
- Polypropylene (PP) yarn
- Core
- Polypropylene (PP)
- End configuration
- Double O-ring collar (BX)
- O-rings
- EPDM
- Use
- Disposable, not washable
Installation and Replacement
- Shut off the water supply and relieve the pressure in the housing.
- Open the housing, pull the used cartridge out by its collar and clean the inside of the housing.
- Moisten the O-rings of the new cartridge and push the collar fully into the socket in the head.
- Close the housing, slowly reopen the water supply and check for leaks.
- On first use, flush the line for a few minutes.
String wound cartridges are disposable and must not be washed and reused. Replace the cartridge when the inlet-outlet pressure difference reaches 1 bar, or every 6 months at the latest. Do not use the cartridge with damaged O-rings.
Packaging
| Stock Code | Box Size (mm) | Pcs / Box |
|---|---|---|
| 6-01-10-B01 | - | |
| 6-01-20-B01 | - |
Please contact our sales team for packaging details.
Wholesale and OEM
Request a quote and lead time for this product
We quote distributors, installers and project contractors by stock code. Ask us about OEM and private label production as well.
