GA and GA Plus Series Filter Housings
GA10 Plus Single Filter Housing (Plastic Thread)
10" · Single · 1 ½" - 2" plastic thread · Clear bowl
10" single filter housing for pre-filtration of mains water in homes and businesses. It is compatible with C series filters (Ø 57 mm double O-ring collar); the large connection size suits high-flow lines.
- Cartridge length
- 10" C series
- Connection
- 1 ½" - 2" plastic thread
- Operating pressure
- 0.5 - 8.6 bar
- Operating temperature
- 4 - 45 °C
Stock codes5-FK-GAP-10-P505-FK-GAP-10-P63
Overview
The ports in the head have plastic threads; they are available in 1 ½" and 2" sizes. The clear bowl lets the filter condition be checked from outside.
Features
- Clear bowl shows the cartridge condition
- Plastic threaded ports
- Compatible with C series collar filters
- Easy installation with wall bracket
Applications
- Pre-filtration of mains water at building inlets
- Sediment and carbon filtration ahead of water purifiers
- Protection of boilers, water heaters and appliances
- Filtration of well and tank water
Models and Stock Codes
| Stock Code | Model | Connection | Flow* (L/min) | Cartridge | Single Box (mm) |
|---|---|---|---|---|---|
| 5-FK-GAP-10-P50 | GA10 Plus Single Filter Housing 1 ½" | 1 ½" | 120 - 180 | 10" | 155 × 135 × 360 |
| 5-FK-GAP-10-P63 | GA10 Plus Single Filter Housing 2" | 2" | 180 - 260 | 10" | 155 × 135 × 360 |
Port threads are BSPP. * Recommended flow range by connection size. The single box size is the outer size of the product package.
Compatible filters: C series washable plastic and plastic-cage steel filters (Ø 57 mm collar).
Technical Specifications
Operating Conditions
- Max. operating pressure
- 8.6 bar (125 psi)
- Min. operating pressure
- 0.5 bar (7.25 psi)
- Operating temperature
- 4 - 45 °C (39.2 - 113 °F)
- Water pH
- 6.5 - 9.5
- Suitable cartridge
- 10" C series (Ø 57 mm collar)
- Use
- Cold water line
Materials and Construction
- Head
- Reinforced polypropylene (PP), blue
- Bowl
- Clear SAN
- Port thread
- Plastic
- Gasket
- Elastomer (O-ring), pre-greased with silicone
- Box contents
- Wrench, bracket, screws, silicone grease
Operating Limits and Use Outside Them
| Parameter | Limit | Below | Above |
|---|---|---|---|
| Operating pressure | 0.5 - 8.6 bar | Flow drops; the gasket may not seat fully | Cracking and leaks at bowl and head; fit a pressure reducer |
| Water temperature | 4 - 45 °C | Freezing cracks the bowl; plastic becomes brittle | The bowl softens and deforms; sealing fails |
| Water pH | 6.5 - 9.5 | Acidic water wears gaskets and threads | Scale build-up and early gasket ageing |
Filter Change and Maintenance
- Shut off the mains water.
- Loosen the air vent (plastic plug) to relieve the pressure in the system.
- Remove the bowl with the original wrench, clean it and insert the new filter.
- Check or renew the gasket and grease it with the silicone grease supplied in the box (5-FK-GA-YED-10).
- Fit the bowl to the head and tighten with the wrench; open the water and repeat the air venting.
Gaskets are supplied pre-greased; re-grease them at filter changes. Use PTFE tape only (no hemp or liquid sealant). Check for leaks for the first 48 hours; replace the housing at least every 5 years.
Packaging
| Stock Code | Box Size (mm) | Pcs / Box |
|---|---|---|
| 5-FK-GAP-10-P50 | 645 × 475 × 360 | - |
| 5-FK-GAP-10-P63 | 645 × 475 × 360 | - |
The housing wrench, bracket, mounting screws and silicone grease (5-FK-GA-YED-10) are included in the box. Please contact our sales team for the number of units per bulk box.
Wholesale and OEM
Request a quote and lead time for this product
We quote distributors, installers and project contractors by stock code. Ask us about OEM and private label production as well.
