2" Inline Mineral Filter
2" inline · F05 · Mineral granule media · Mineral and taste adjustment · Quick-connect
Yellow-bodied 2" inline mineral filter (F05) used in reverse osmosis units. Because the RO membrane removes most dissolved salts, the product water can be low in minerals and flat in taste. The mineral filter adds minerals to this water, slightly increases its TDS and improves its taste.
- Max. flow rate
- 2.8 L/min
- Service capacity
- 5,677 L or 12 months
- ORP (label)
- −50 ~ −200 mV
- Max. temperature / pressure
- 42 °C / 8.6 bar
Stock code6-20-MIN-Ç
Overview
It lowers the ORP. Its main purpose is to adjust the mineral content and taste of the water.
Features
- Adds minerals to reverse osmosis water and improves its taste
- Lowers ORP
- For flow rates up to 2.8 L/min
- Label capacity of 5,677 L (1,500 gal)
- Tool-free, quick replacement with quick-connect stems
- Fits standard 2" inline filter positions
Applications
- Residential reverse osmosis (RO) units
- Use after an alkaline filter
- Under-sink and countertop water purifiers
- Mains-fed (bottleless) water dispensers
- Office and small commercial treatment systems
Models and Stock Codes
| Stock Code | Model | Body | Max. Flow (L/min) | Capacity* (L) | A (mm) | B (mm) |
|---|---|---|---|---|---|---|
| 6-20-MIN-Ç | 2" Mineral Filter (F05) | Yellow | 2.8 | 5677 | 252 | 51 |
A: Overall length (including connection stems) · B: Outer diameter. Sealed (welded) housing; the filter cannot be opened and is replaced as a unit. Flow direction is marked on the housing.
* Label value (1,500 gal or 12 months). Actual capacity depends on water quality and usage.
Technical Specifications
Operating Conditions
- Operating pressure
- 1.4 - 8.6 bar (20 - 125 psi)
- Operating temperature
- 4 - 42 °C (39 - 108 °F)
- Maximum flow rate
- 2.8 L/min (0.75 GPM)
- Replacement interval
- 5,677 L or 12 months
Materials and Construction
- Filter media
- Mineral granules (ceramic ball type)
- Effect
- TDS slightly ↑, ORP ↓, taste
- Housing
- Yellow plastic (typically PP), welded
- Connection
- Quick-connect stems 4/6, both ends
- Use
- Disposable, sealed
Installation and Replacement
- Shut off the unit's water supply and open the faucet to relieve pressure.
- Install the filter between the post carbon (or alkaline) filter and the faucet.
- Connect the quick fittings, observing the flow direction on the housing (IN → OUT).
- Slowly reopen the water supply and check the connections for leaks.
- On first use, flush about 15 litres (4 gallons) of water to drain.
The filter is disposable and cannot be opened or washed. Replace it after 5,677 litres or every 12 months at the latest. It is not a medical product. Do not use with microbiologically unsafe water or water of unknown quality without disinfection.
Packaging
| Stock Code | Box Size (mm) | Pcs / Box | Box Weight | Boxes / Pallet | Pallet Size |
|---|---|---|---|---|---|
| 6-20-MIN-Ç | 280 × 280 × 270 | 25 | 10.09 kg | 40 | 100 × 120 cm (ISO) |
Wholesale and OEM
Request a quote and lead time for this product
We quote distributors, installers and project contractors by stock code. Ask us about OEM and private label production as well.



