2" Inline Hydrogen + Alkaline Filter
2" inline · Magnesium + alkaline mineral media · Dissolved hydrogen · pH 8+ · ORP −200+ mV · Quick-connect
Sealed 2" inline hydrogen + alkaline filter installed at the membrane outlet, before the storage tank, of reverse osmosis units. When its magnesium-containing media comes into contact with water, a small amount of hydrogen gas (H₂) is produced and dissolves in the water. The magnesium hydroxide formed in the reaction and the alkaline minerals raise the pH.
- Outlet pH (label)
- 8+ pH
- ORP (label)
- −200+ mV
- Size (A × B)
- 252 × 51 mm
- Replacement interval
- 12 months (max.)
Stock code6-20-HYD-Ç
Overview
As stated on the label, the filter increases alkalinity, pH and mineral content and lowers the ORP. The amount of dissolved hydrogen depends on flow rate, contact time and water temperature, and decreases as the water stands.
Features
- Produces dissolved hydrogen through its magnesium media
- Raises the pH and alkalinity of the water
- Outlet pH 8+, ORP −200+ mV (label value)
- Adds magnesium and minerals to reverse osmosis water
- Tool-free, quick replacement with quick-connect stems
- Fits standard 2" inline filter positions
Applications
- Residential reverse osmosis (RO) units
- Under-sink and countertop water purifiers
- Add-on filter for existing RO units
- Mains-fed (bottleless) water dispensers
- Office and small commercial treatment systems
Models and Stock Codes
| Stock Code | Model | Filter Media | Max. Flow* (L/min) | A (mm) | B (mm) |
|---|---|---|---|---|---|
| 6-20-HYD-Ç | 2" Hydrogen Filter | Magnesium + alkaline minerals | 1.9 | 252 | 51 |
A: Overall length (including connection stems) · B: Outer diameter. Sealed (welded) housing; the filter cannot be opened and is replaced as a unit. Flow direction (FLOW) is marked on the housing.
* Typical value (0.5 GPM). A lower flow rate increases contact time and the effect on the outlet water.
Technical Specifications
Operating Conditions
- Operating pressure
- 1.4 - 8.6 bar (20 - 125 psi)
- Operating temperature
- 4 - 38 °C (39 - 100 °F)
- Maximum flow rate
- 1.9 L/min (0.5 GPM)
- Replacement interval
- 12 months max.
Materials and Construction
- Filter media
- Magnesium granules + alkaline minerals
- Formed in water
- Dissolved H₂, Mg²⁺ (pH increase)
- Housing
- White plastic (typically PP), welded
- Connection
- Quick-connect stems 4/6, both ends
- Use
- Disposable, sealed
Installation and Replacement
- Shut off the unit's water supply and open the faucet to relieve pressure.
- Install the filter between the membrane outlet and the tank inlet.
- Connect the quick fittings, observing the flow direction on the housing (FLOW).
- Slowly reopen the water supply and check the connections for leaks.
- On first use, run water for at least 5 minutes until it runs clear.
The filter is disposable and cannot be opened or washed. Replace it every 12 months at the latest; the media is consumed in use and its effect decreases. It is not a medical product. Do not use with microbiologically unsafe water or water of unknown quality without disinfection.
Packaging
| Stock Code | Box Size (mm) | Pcs / Box | Box Weight | Boxes / Pallet | Pallet Size |
|---|---|---|---|---|---|
| 6-20-HYD-Ç | 325 × 325 × 330 | 25 | 11.25 kg | 40 | 100 × 120 cm (ISO) |
Wholesale and OEM
Request a quote and lead time for this product
We quote distributors, installers and project contractors by stock code. Ask us about OEM and private label production as well.
