2" Inline Alkaline Extra Filter
2" inline · Alkaline mineral media · Outlet pH 8+ · White body · Quick-connect
White-bodied 2" inline Alkaline Extra filter installed at the membrane outlet, before the storage tank, of reverse osmosis units. Its alkaline mineral media adds minerals such as calcium, magnesium and potassium to the low-mineral water leaving the RO membrane and raises its pH.
- Max. flow rate
- 1.9 L/min
- Service capacity
- 7,571 L or 12 months
- Outlet pH (label)
- 8+ pH
- Temperature / max. pressure
- 5 - 40 °C / 8.6 bar
Stock code6-20-ALKE-Ç
Overview
Reverse osmosis water is usually slightly acidic and low in TDS. The alkaline filter raises the pH, slightly increases TDS and lowers the ORP.
Features
- Raises the pH of reverse osmosis water
- Adds calcium, magnesium and potassium to the water
- Lowers ORP
- Label capacity of 7,571 L (2,000 gal)
- Tool-free, quick replacement with quick-connect stems
- Fits standard 2" inline filter positions
Applications
- Residential reverse osmosis (RO) units
- Under-sink and countertop water purifiers
- Add-on filter for existing RO units
- Mains-fed (bottleless) water dispensers
- Office and small commercial treatment systems
Models and Stock Codes
| Stock Code | Model | Body | Max. Flow (L/min) | Capacity* (L) | A (mm) | B (mm) |
|---|---|---|---|---|---|---|
| 6-20-ALKE-Ç | 2" Alkaline Extra Filter | White | 1.9 | 7571 | 252 | 51 |
A: Overall length (including connection stems) · B: Outer diameter. Sealed (welded) housing; the filter cannot be opened and is replaced as a unit. Flow direction is marked on the housing.
* Label value (2,000 gal or 12 months). Actual capacity depends on water quality and usage.
Technical Specifications
Operating Conditions
- Operating pressure
- 1.4 - 8.6 bar (20 - 125 psi)
- Operating temperature
- 5 - 40 °C (41 - 104 °F)
- Maximum flow rate
- 1.9 L/min (0.5 GPM)
- Replacement interval
- 7,571 L or 12 months
Materials and Construction
- Filter media
- Alkaline mineral ceramic balls
- Releases into water
- Ca, Mg, K
- Housing
- White plastic (typically PP), welded
- Connection
- Quick-connect stems 4/6, both ends
- Use
- Disposable, sealed
Installation and Replacement
- Shut off the unit's water supply and open the faucet to relieve pressure.
- Install the filter between the membrane outlet and the tank inlet.
- Connect the quick fittings, observing the flow direction on the housing (IN → OUT).
- Slowly reopen the water supply and check the connections for leaks.
- On first use, flush at least 12 litres of water to drain.
The filter is disposable and cannot be opened or washed. Replace it after 7,571 litres or every 12 months at the latest; the pH effect decreases over its service life. It is not a medical product. Do not use with microbiologically unsafe water or water of unknown quality without disinfection.
Packaging
| Stock Code | Box Size (mm) | Pcs / Box | Box Weight | Boxes / Pallet | Pallet Size |
|---|---|---|---|---|---|
| 6-20-ALKE-Ç | 280 × 280 × 270 | 25 | 10.24 kg | 40 | 100 × 120 cm (ISO) |
Wholesale and OEM
Request a quote and lead time for this product
We quote distributors, installers and project contractors by stock code. Ask us about OEM and private label production as well.



